stillhanginginthere
New Member
Hi, looking for some advice please. I would like to use the following without a controller or battery. Will use a timer. This is just to pump water at specified times to plants growing in pots.
The solar panel is a Model SGP-5W-18. Polycrystalline. Peak power 5wp. Power tolerance +/- 3%. Open circuit voltage 21.9v. Maximum power voltage 17.6v. Short circuit current 0.31. Maximum power current 0.2 8. Maximum system voltage 600v DC. Size 185x250x15mm.
The pump is Anself model DC30A. Brushless DC. Hmax 350cm. Qmax 260 L/H. Input DC 12v/5w.
Any advice as to whether this is feasible would be greatly appreciated.
Thanks
The solar panel is a Model SGP-5W-18. Polycrystalline. Peak power 5wp. Power tolerance +/- 3%. Open circuit voltage 21.9v. Maximum power voltage 17.6v. Short circuit current 0.31. Maximum power current 0.2 8. Maximum system voltage 600v DC. Size 185x250x15mm.
The pump is Anself model DC30A. Brushless DC. Hmax 350cm. Qmax 260 L/H. Input DC 12v/5w.
Any advice as to whether this is feasible would be greatly appreciated.
Thanks