ZeFrenchDude
New Member
Hi, greeting from France,
i didn't find the solution yet myslef so i explain here my problem.
I have a classic solis inverter (S6-GR1P 3K), without battery, no hybrid, the "classic " one. i have 2975 W of solar pannel as well. system is working good enough for now.
I have the wifi gateway and the solis cloud app.
it seems that is was possible with inverter to have a specific view :
from kWh by solar station to
- kWh consumed from load
- kWh exported to grid,
- kWh imported from the GRID.
i did purchase an ACREL ACR10R for that, recommanded by the origninal solis document.
i did plug it "right enough"to have the power in the screen of the meter.
SO first of all, i have this view on the app : only production per day.
and my goal is to have this view (print screen from guy in facebook) using data on imported/ exported in grid.
So, what i have done.
following advice, I install the acrel ACR10R using this set up :
I set the acrel using thoss parameter :
Bus addr 0001
Braun : 9600
node : none
My acrel is flashing green on run
Flashing red on "COM" that seems to be good aswel.
the acrel give me correct U, I and P (W).
on the Solis, i've used what i've seen on the web concerning this procedure :
1°) set of grid
2°) put 24h => enable ( to see night consumption)
3°) internal EPM :
1ph EPM => ACR10R16TE
mode : meter on grid
Back Flow 3500 kW (i have 3000 installed)
BUT when i go to "information", no information of exported kWh, 0000,0 kWh.
the set up doesn't work, Solis app don't give me export or inport power at all, only Solar panel -> LOAD.
this is what i get right now...
what am i missing ?
thanks for reading and helping, cheers !
i didn't find the solution yet myslef so i explain here my problem.
I have a classic solis inverter (S6-GR1P 3K), without battery, no hybrid, the "classic " one. i have 2975 W of solar pannel as well. system is working good enough for now.
I have the wifi gateway and the solis cloud app.
it seems that is was possible with inverter to have a specific view :
from kWh by solar station to
- kWh consumed from load
- kWh exported to grid,
- kWh imported from the GRID.
i did purchase an ACREL ACR10R for that, recommanded by the origninal solis document.
i did plug it "right enough"to have the power in the screen of the meter.
SO first of all, i have this view on the app : only production per day.
and my goal is to have this view (print screen from guy in facebook) using data on imported/ exported in grid.
So, what i have done.
following advice, I install the acrel ACR10R using this set up :
I set the acrel using thoss parameter :
Bus addr 0001
Braun : 9600
node : none
My acrel is flashing green on run
Flashing red on "COM" that seems to be good aswel.
the acrel give me correct U, I and P (W).
on the Solis, i've used what i've seen on the web concerning this procedure :
1°) set of grid
2°) put 24h => enable ( to see night consumption)
3°) internal EPM :
1ph EPM => ACR10R16TE
mode : meter on grid
Back Flow 3500 kW (i have 3000 installed)
BUT when i go to "information", no information of exported kWh, 0000,0 kWh.
the set up doesn't work, Solis app don't give me export or inport power at all, only Solar panel -> LOAD.
this is what i get right now...
what am i missing ?
thanks for reading and helping, cheers !
Last edited: