myersfamilyhome
New Member
- Joined
- Feb 9, 2021
- Messages
- 140
Woke up this morning to see my controller only putting out 12-13v 0 amps. Been testing everything and even tried different cables and panels. While I'm getting proper volt/amp readings from panels, and getting the same readings to the end of the wires that go into the controller, the controller still is not registering more than 13v@0A. I've disconnected everything and let controller sit for 15 minutes without any power from either battery or panels, but no fix. Not sure what happened or why. Was all good yesterday with no problems.
