Shoe
New Member
Good afternoon (and after a quick scan I was unable to find a forum topic about my specific help needed),
I have a 6 string combiner going into a Sungold Power SP6548 that is a 48V charger/inverter. From there into my battery bank.
Nothing has changed from yesterday besides rain we received this morning in central Texas but now the combiner nor the charger/inverter are receiving any solar input voltage. My current setup is solar to combiner to charger/inverter and the AC out goes into a separate subpanel that powers 4 mini splits only and DC out goes to my battery bank.
This morning and for the rest of the day, as stated, my charger/inverter is not getting, receiving, or “seeing” any voltage from the combiner. When I bypass the combiner with one string of panels to troubleshoot I am not getting any voltage input at the inverter. Multimeter for one string was at 223V and increasing as the sun got higher.
Lastly, combiner is only showing mV on input and output side. No circuits have been tripped or fuses blown at the combiner.
First question is does anyone have an idea on why I plug in one string of panels producing 223V plus at the multimeter not putting voltage to the charger/inverter when bypassing the combiner to troubleshoot?
Second question is why am I not seeing any voltage on the input or output side of the combiner?
Thank you all in advance for any and all help to a brand new user!!!
I have a 6 string combiner going into a Sungold Power SP6548 that is a 48V charger/inverter. From there into my battery bank.
Nothing has changed from yesterday besides rain we received this morning in central Texas but now the combiner nor the charger/inverter are receiving any solar input voltage. My current setup is solar to combiner to charger/inverter and the AC out goes into a separate subpanel that powers 4 mini splits only and DC out goes to my battery bank.
This morning and for the rest of the day, as stated, my charger/inverter is not getting, receiving, or “seeing” any voltage from the combiner. When I bypass the combiner with one string of panels to troubleshoot I am not getting any voltage input at the inverter. Multimeter for one string was at 223V and increasing as the sun got higher.
Lastly, combiner is only showing mV on input and output side. No circuits have been tripped or fuses blown at the combiner.
First question is does anyone have an idea on why I plug in one string of panels producing 223V plus at the multimeter not putting voltage to the charger/inverter when bypassing the combiner to troubleshoot?
Second question is why am I not seeing any voltage on the input or output side of the combiner?
Thank you all in advance for any and all help to a brand new user!!!