Valence Power U-Charge P30-36C

[OffGridEnergy]

Hi everyone, I’m a battery supplier in the UK and I have bought a load of these batteries from a bus company, they have come out of test bus’s and have only done about 100 cycles max, they have been stored correctly - this is why the cycles are at around 100 most of these are to keep the batteries right and would only have about 10 full cycles when test driving the bus. They all have a green light flashing on them.

I want to link up to the BMS but can seam to find the software anywhere, can anyone help me with getting the software to communicate with these batteries to get full information on each one, also I’m looking for a connector to plug in to the original plugs, can’t find them either?

Any help is very much appreciated.

Thanks Batman

 

[karlbar2k]

I have just started my discovery journey with Valence stuff for home battery storage and this thread has been helpful for the XP series
https://diysolarforum.com/threads/valence-xp-super-thread.5683/ there is a link in there for both the 12.12 version and also the older 12.9
think the cable to connect just to the batteries can be had from ebay

 

[karlbar2k]

never mind I can se you have posted in that thread as well :D