Recent content by DanielS

Sorry…I somehow haven’t gotten any notifications that people responded to this!?! Thanks for the responses. Yeah, I’m looking for a pergola covering that will allow some light to pass for plants. I’ve seen very specialized expensive glass panels, but was looking for something more DIY. The...

I just got this up and running yesterday. Was able to export about 32A at just under 52V. When I bumped the Chargeverter up to 34A, the car tripped off the output. At some point I’m going to try to parallel the two 120V outputs to see if I can get over 3k. I’ll likely test just loading the...

Thanks but looking for a cut sheet or website for a panel I can get in the US. Thanks

Looking to cover a pergola with Bifacial and can’t seem to find in any cut sheets if the panel is transparent around the cells. Anyone have any recommendations that would allow some light to pass through around the cells? Thanks in advance!!

You have experience with this one @Zwy?

http://szhxht.com/en/Products/info_itemid_14136_lcid_22.html Seems the be the right fan... can't find it anywhere in the US... at least I have the dimensions, current draw, and CFM on it...

Folks, wanted to see if anyone has found a US available equivalent fan for the DZ08038B12HH installed in the LV6548. I've had an intermittent fan issue that I've neglected which has now caused one of the three fans in one of my inverters to fail making my system inoperable. I know there are a...

Kicking this post again to see if anyone has seen this. Same situation as back in Feb. Temp on inverter with the Fan Lock warning is about 7C lower that as the one next to it since it’s got less load and the fans are running full speed. Garage temp is in the 70s, house has less that 1kW...

Success!!!

Just reading that now…sorry I did what I hate others do…not reading all the way to the end. I’ll unscrew the 20 some odd screws and report back later. Love all the help we get here. Who needs tech support when we have us?!?

Having the same issue.

Wondering if anyone has seen the Warning in the title. I’m only getting it on one inverter, but the fans in that inverter are running at full speed it seems even those I’m at a relatively light load. Room temp is in the 60’s. Any ideas?

I've found I have to set Source Priority in both inverters and Charge Priority in only in Inverter #1. @wayne530 is the master at this damn thing. I really wish they had a little more refinement on these as they are pretty important. Solar Assistant seems to be trying to develop this...

Correct, you can’t charge from Utility unless your source is Utility.

This is expected…you can drop the breaker if you want to save the grid power, but the need for the consumption is to be able to stay frequency locked with the grid. Without it you wouldn’t be able to transfer between battery and grid with minimal transfer time. Definitely arguable that it...