execv

I would just buff it out and be happy. If it was a used fuse it probably would show some sort of scuffing from the holder or tarish...

I ordered this Class T fuse from Blue Sea Systems. It has some discoloration on one end. Has it been used? Is it OK to use or should I...

Ok perfect, thanks! Thanks again for the help!

Thank you. Per your advice, and everyone else's, I have come up with this. The 150a fuses are MRBF, the 200a fuse is class T. I...

With my setup (3x 100ah batteries) in 12v configuration and the 2000 watt inverter, what size fuse would you put on each battery between...

Ok awesome, this helps a lot. Thanks! Yes, the 8 AWG that goes to the trailer goes directly to a fuse for the trailer. The additional...

I have 3 of these. It does have a BMS but it does say "Discharge Current: 100amp. Max Discharging Current: 280 amp (5 second). Should I...

30 amp. The trailer is currently wired with 8awg. I am not changing that (I will connect 8awg to the existing fuse that powers the trail).

Does anyone have any feedback on the size wire I should use between the batteries and the bus bar?

From reading Will's book, it sounds like I could safely use 2 AWG to go from the batteries to the bus bar, and then use 2/0 to the...

That makes sense. What would the recommend size wire be if I were to write each battery to the bus bar? I'm assuming I'd still need 2/0...

Hello, I'm swapping out my 2x lead acid batteries on my trailer with 3x Lifepo4 batteries (and adding a shunt/inverter), and I wanted...