You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
S
i guess i have to try and give it a go in the next week or so when i have some free time to reconfig etc, and i should look for the sma...
-
S
I dont have that much load on the sunny island as i have several loads off the sunnny island its Mainly power and lights
and a two...
-
S
Was trying to find actual written technical specs on pv backfeed max through ac2 to grid the attached file states max pv on ac1 is...
-
S
Thaxs for the reply,
I was actually thinking myself what you mentioned "I think GdRvPwr only applies when backfeed is not enabled...
-
S
Im hoping some feedback if that is ok please if some has knowlodge re below, really appreaciate it..
So im finally going to re config...
-
S
"I save them for use when grid is down." that was the reason for the initial setup i have, but im not utilising the batteries at all so...
-
S
you said you have your pv on the a1 load side correct ? my Pv is currently on the grid input A2 side so twhat are the parameters to...
-
S
I understand this is an old Post how did you go ?
As i looking at doing something similar possibly
I have a sunny island in Si8.0...
-
S
Since this forum seems to truly be "Do It Yourself", I discovered the answer to my own question myself. Posted here to help others.
To...
-
S
tech docs say you can program freq limits for on/off relay ? inc voltage limits and thresholds etc
-
S
would this work for you ?
https://www.catchpower.com.au/catch-solar-relay-1
-
Loading…
-
Loading…
-
Loading…
-
Loading…