Shaun, I got the info on the BT password solution here at the forum from Ep1phany, great what to do, solved that issue I had of several months. So far the BMS have been working well, and fortunately they were setup correctly before the BT password thing hit while on a two month road trip.
So JK is difficult to get a hold of... my seller contacted them a number of times when a software update locked me out of my JKs, and we were on the road. He'd contact them about 8:00 pm CST, and they'd provide the BT temp password to log in. After that I could get into my settings password...
Not sure I grasp this: .if you want jk to say 100 percent just change the voltage so that bms trip and cutoff charging.
Where would I make that/those changes. Seems to me the "calibrating volt" is not the right [place, as that changes dynamically by its self when the batt is being charged, no...
Still wanting to find out from a wisened user if I can use one of these new JK BMSs for a 4S setup?
Those only show 8S and higher. I'd think it's be possible by telling the BNS I've only got 4S
https://srikobatteries.com/?s=jk+inverter+bms&post_type=product
Thank you.
There are two BMS passwords.
First to enter the BMS is a BT password. You can get that here: https://mirofromdiro.github.io/JK-firmware-code/
Once you BT login, you will be taken to the first status page. Use the left top menu to go back to the BMS ‘devices’ page, or swipe from left to right...
Good job. Finding some of the particular fittings for the JK BMS is not easy. I'm looking for the heater port connector wired plugin for two JK b2a8s20p BMS.
I've a JK B2A8S20P, and I'm unsure if I need to connect other negatifves to the -P post, other than the DC-DC MMPT solar charger. I have a 3K inverter charger that will go into the system, and will the BMS work correcrtly with just the MMPT connected to it, or must I also connect the neg from...
I have two B2A8S20P, which worked great from Sept 23 to Jan, this year. Updated the Android app from Play Store in Jan, and Bluetooth pairing login failed. JK has now given 3 or 4 temp/15 minute Bluetooth passwords, which have worked to get into the BMSs, but only lasts those 15 minutes.
The...
I have two JK B2A3-88S20P BMS for last nine months or so, and working fine both on the kitchen table, no inverter, and. in the RV all hooked up.
Now, I just received a new BMS, B2A8S20P, and have connected it up, in the kitchen, no inverter or other equip, just the BMS and I receive a...
The second photo upper portions shows the remaining capacity, which today now shows correctly at 304AH -different than the second photo number, and above that is the remaining %
Yes, when I set the "Calibrating volt", say to 13.** whatever, and go back to the first page which shows the main stats (second photo), when charging via power supply or solar charging (maybe not charging too - I'll have to check that), in the upper left corner is a large volt number, say 13...
TacomaJoe,
Good info, thank you. Then that setting is not the ceiling charge level max, which would turn off charging? I do have permission to change the setting, but as the battery is being charged, that setting changes by its self to about whatever the charge level the battery seems to be...
I've been testing out the battterys, BMSs, DC-DC/MMPT charger, and shunt in the kitchen, panels on the back deck, for the last few weeks. All seems good. These batteries came mated.
The 3K inverter is rough installed and it's working as designed, currently for the lead acid batterys in the 02...
I just updated to 4.8.1 and after doing so and rebooting got the'make a pair failure'. 1234 does not work, I don't recall changing the bluetoorh pswd. Have tried otgee 'common' cimbos, 4 and 6-8 digit ... nope.
I did change the internal 'Settings' password, all letters.
Have been trying to get...
I've not been able to find that BT password change area, Would you please put up a photo of that menu and location? Device list, meaning from the app page which scans/shows the several bms devices? On that initial screen, after bt scans it lists the two bms I have. The top far right initial...
Feb 15, still no JK fix after 3 custom login BT passwords lasting only 10-15 minutes, this for the last 5 weeks.
Vendor says he will replace, but should I go with JK AGAiN?
Just like the title says, I don't get what I am doing wrong with my settings for the JK BMS 4-8S, 200A BMS with EVE 304AH, 12v batteries setup. I have followed general settings for the JK Lipo setup, and have tried max charge to 3.65, 3.60, in-between, loweer, and what I seem to get is that @...
I have two B2A(4-8)S200 Initially they worked well and still do. Turned on in Sept.
In Dec updated the firmware while 1200 miles away from home base, where they were installed. After that have received the BT fail to connect error. I've gone through 4 attempts with a new password from JK/China...
JK get off your ass and resolve these custoner issues. I've had two custome passwords, only for me to be able to access each one about 10 minutes, before they return to failed bluetooth login.
UNACCEPTABLE! HOW MANY CUSTOMERS HOURS ARE YOU WASTING BECAUSE YOU WILLINGLY FAIL TO ADDRESS THIS...
Does the JK BMS software have a place to change the BT password, by itself, which is different than the overall, once you have bluetoothed into the bms, 'Settings' password, and if so, where is that BT password change option?
This is for a B2A4-8S20P
If it exists, it is not on V 4.17, nor on...