Steve_S
Offgrid Cabineer, N.E. Ontario, Canada
The cells need to be at same voltage, preferably after charging & 1 hour of settle time. That can mean just charging to 3.300 until amps taken drops to 5A.
I always touch the contacts to ensure it is zeroes out before I test the next cell.
I haven't used my 1030+ for a few years, after getting the 1035+ there wasn't much point.
I always touch the contacts to ensure it is zeroes out before I test the next cell.
I haven't used my 1030+ for a few years, after getting the 1035+ there wasn't much point.