Hi,
I have a small test setup with Solar panels->SCC PWM->12V gel battery.
I want to connect 12V devices, but some of them are sensitive to over voltage, when connecting one of them to the battery(which was around 12.7V), it damaged the device, it was still powering up, but did not work well after that.
I'v tested the original power supply with my volt meter, and it was putting out 11.94V max.
And sometimes the battery can go up to 13V, I thought of using a voltage converter, so it will be max 12V output, but reading reviews, people say they are not accurate.
Thanks.
I have a small test setup with Solar panels->SCC PWM->12V gel battery.
I want to connect 12V devices, but some of them are sensitive to over voltage, when connecting one of them to the battery(which was around 12.7V), it damaged the device, it was still powering up, but did not work well after that.
I'v tested the original power supply with my volt meter, and it was putting out 11.94V max.
And sometimes the battery can go up to 13V, I thought of using a voltage converter, so it will be max 12V output, but reading reviews, people say they are not accurate.
Thanks.