rtasker
New Member
Hi There, I’m setting up my first solar system and trying to avoid any newcomers mistakes. I’m installing a 6000XP with a Pro/tran 10 Transfer Switch. I plan on hardwiring my AC load output from the 6000XP to the Protran inlet box. According to the Protran manual it looks like ether L1 or L2 can be hooked to the black or white wire, so the orientation doesn’t matter. In the 6000XP manual it shows Black to L1 & Red to L2.
My question is with the AC load wires can I install these backwards and cause some real damage to my equipment?
I’m wondering when the 6000XP switches to AC pass-through is it important the AC load wires have the correct phase lined up to the two pieces of equipment?
Maybe L1 & L2 in the manuals are shown that way for conventional reasons just to help keep track of things.
Please let me know what direction you think is best.
Protran Manual:
6000XP Manual:
My question is with the AC load wires can I install these backwards and cause some real damage to my equipment?
I’m wondering when the 6000XP switches to AC pass-through is it important the AC load wires have the correct phase lined up to the two pieces of equipment?
Maybe L1 & L2 in the manuals are shown that way for conventional reasons just to help keep track of things.
Please let me know what direction you think is best.
Protran Manual:
6000XP Manual: