That looks like it might. Thanks. But darn that’s expensive!Top LEFT or RIGHT??
Would this work
OEM Model Generator Interlock Kit Siemens, Murray, ITE or Gould 100A Panels | GenInterlock
OEM Original Equipment Manufacture Made by Siemens UL Listed Fits Siemens, Murray, ITE and Gould 100 Amp panels Will work either on the right or left side of panel Will NOT work on other style breakerswww.geninterlock.com
EDIT: Your main is a single handle vs. the double handle for this interlock. The toggle bar would have to be extended for this to work on your main.
Actually it won’t fit. Mine’s a 200 amp single pole breaker. This is for a double pole and the part that blocks the breaker switch would not block mine
That looks like it. But I see it’s out of stock.OEM Model Generator interlock kit Siemens and Murray, 150 and 200 Amp panels | GenInterlock
OEM Original Equipment Manufacture Made by Siemens UL Listed Generator Breaker goes directly below Main spaces 2 & 4 will NOT work if main is on the leftwww.geninterlock.com
Out of stock at the particular vendor but it lists a part number that can be searched at other suppliers.
I’ve searched and haven’t found any other retailers. There was one sold on EBay but it was over $100 and I would not pay that ridiculous price!
That won’t fit. My breaker is on the right
Good luck in the hunt, thought you could flip the plate.
The panel is over 20 years old but it works fine. And it’s 200 amp which more than covers my needs. So I don’t plan on replacing it.
Right, if it ain't broke don't fix it.
I’ve got some aluminum stock, I might just make my own.
