onrbikes
New Member
Have recently installed a balanced set of Lifepo4 batteries with a Daly bms.
It's hooked up to my Eadysolar via a smartshunt.
I control it all via 2 seperate apps and works good I think.
Should both the Victron app and the Daly app have the same SOC reading.
At the moment the Daly reads about %5 less.
When the smartshunt is at %100 it still allows a trickle in.
The lifepo4 are set at a max volt of 28.2v. They sit there for about 10 minutes and temperature never changes.
Thanks
It's hooked up to my Eadysolar via a smartshunt.
I control it all via 2 seperate apps and works good I think.
Should both the Victron app and the Daly app have the same SOC reading.
At the moment the Daly reads about %5 less.
When the smartshunt is at %100 it still allows a trickle in.
The lifepo4 are set at a max volt of 28.2v. They sit there for about 10 minutes and temperature never changes.
Thanks