rtasker
New Member
I have a EG4 6000xp that connects to my furnace blower motor (120v) through a protran 2 transfer box. When viewing the power readings of the Emporia energy sensor that is connected to the furnace circuit breaker in the main panel the power readings seem to by cycling up and down when the Transfer Switch is connected to the Gen (6000XP). When the TS is connected to Line (Grid) power the readings of blower is very stable. There is no L1/L2 power connected to the 6000XP only the neutral and ground wires running from the main panel’s ground/neutral bond. Why would power readings be cycling so extreme when running off of the 6000XP, but looks very stable when running off of the line power?
Not sure what this could mean.
Running off 6000XP
Running off of line (Grid)
Not sure what this could mean.
Running off 6000XP
Running off of line (Grid)