I have two 8s 100A Overkill BMS's on (16) 3.2v 100aH LiFePO4 cells in a 24v battery banks. The inverter is off, there is no load on the batteries, the remote monitoring display MT50 shows the batteries charging (see attached). The MT50 shows a charged battery. The software shows zero amp...
Here is what is going to happen as soon as possible. I bought four used 250W solar panels. I am havng a new rack fabricated for the four panels. I don't know if the Epever MPPT 40A SCC will handle 1000 nominal watts or if I will have to buy another SCC. I am going to buy this: Orion-Tr Smart...
You can't pay people to work these days. Covid days is a DIY'er's dream (or nightmare). Here is a video where diagrams are downloadable .pdf and free and include wiring and fuse sizes: .
1) Anyone know what input and output refer to with a disconnect switch between battery bank and inverter charger?
2) Also, the two poles on the Epever Tracer Charge Controller with a "light bulb" symbol; do they connect to the DC fuse block via the 25A switch and the Victron Energy Battery...
BMS is 8S 100A Overkill. I've got some 1/0 awg left over from my last small build. And I've got some 3/0 awg that's new. Have not seen any recommendations except what comes with most BMS's. Just trying to get some free advice.
Yes, the Fujitsu unit looks good. Can you recommend any budget models with the high SEER numbers?
I have two 8S2P batteries, total of (16) 3.2V 280Ah LiFePO4 cells, 400W of solar panels, Epever 40A MPPT Tracer, and a Samlex EVO 2224 inverter charger. Would this system run a mini split?
If you have any clout with Amazon, if that is where you bought it, Amazon should step in and give you a 100% credit. They know they are selling items that break easily and it doesn't affect their bottom line to give refunds. That is how Walmart treats defects.
What are the LiFePO4 battery terminals made of? The 3/8" stainless steel bolts hold the 1/0 awg lug down onto a copper bus bar. How much resistance is present? The only equivalent copper bolts were for sale on E-Bay. The big box stores have copper split bolts.
Would a Victron Energy Battery Protect 12/24 Volt 100 amp between the DC-DC converter and the battery or between the DC-DC converter and the 12V Fuse Block prevent low voltage?
The latest conspiracy theory: Amazon sells you an item with a delivery date they know they cannot meet; they just don't bother to tell you. The delivery date arrives and the item, it turns out, ran out at the Amazon warehouse and has to be shipped from China. You find out on delivery day that...
Thank you for pointing that out. There was no link to the battery protect on the components list and since it is not needed now, how would the wiring look? Wondering where the wires that went to the battery protect are supposed to go now. At least it got me to wondering whether I'm up to...
On the other hand, why not take a four receptacle surge protector cut the plug off of it and wire it into the Line out of the inverter charger. Would that work. At least we could get on the road to Cali via Phoenix. Emailed Samlex and they refused to give any recommendations about their $1200...
My hat is off to you for surviving to 81. I'm 75 and the LiFePO4 batteries will be the death of me yet. Browneye is spot on about the learning curve. I started with Battleborn and then went with the DIY on LiFePO4. I still haven't got a clue how to put 16 cells together that won't spark...
Success rate needs to factor in follow-up and customer service. Basen will think of every excuse to deny a warranty claim, in my experience. I got 15 cells out of 16 cells that could hold a charge. Number 16, they refuse to listen to me that the cell will not charge and will not hold a...
The output breaker is 63A. Not sure what the output load is. The SCC has a maximum PV input current of 40A. 32.07A is the combined short circuit current of these three solar panels. So, the array is not over-amped. In other language the amps do not exceed the maximum amps that the SCC can...
So, I would assume that the same configuration would apply when connecting two 8S batteries with two BMS's together? And what do you mean, "Choose the operating range conservatively?" Thanks
My gosh you guy are a big help! I will go through with the 9000BTU mini split; it is the only way I can be sure that the batteries are kept at a reasonable temperature. Not to mention that I got awfully tired of sleeping in 91 degrees last Summer. I can't thank you enough.
The Epever Tracer 4215BN SCC maximum PV input current is 40A and the maximum PV open circuit voltage at 25 degrees C. is 138v. The SCC rated charge power at 24v is 1040v and maximum PV array power is 3x or 3120v. The three solar panels in parallel have a combined short circuit current of...
What are you talking about? The Basen USA is the Chinese and they are not selling replacements and they have no local customer service, email, or phone number. The guy I bought my batteries from told me the same thing. Basen USA sells in packs of (4) four cells; and it goes through their...
It was some good luck that took me to Los Angeles from Virginia Beach via I-40, then up to Rapid City, South Dakota, and brought me home to Virginia Beach, Virginia. The solar-powered system works like a charm for DC power and AC power. "I've seen things you wouldn't believe . . Attack ships...
Wonder if these 20A MC4 with the diode would protect solar panel wires, like 12 awg, with lower ampacity from over-current from combined short circuit current that is too high due to parallel configuration, for example, three large solar panels in parallel. Here is some for sale:
Solar Diode...
I can't seem to find inline fuses larger than 30A online. Nate Yarbro has a video for fusing solar panels here: . He has another video on a breaker box with links to the parts.
I think the portable air condition draws 7.5 Amps @ 120 VAC = 900 Watts =~ 45A (after efficiency etc). The batteries are connected to a Samlex EVO 2224, 24v inverter-charger connected to the grid and it is in charging mode. So, the batteries should be charged.
This cell is barely 12 months old and has a 5-year warranty according to Basen but they refuse to replace it. She babbles on about an "ov" over voltage? Not by me.
Manufacturer: EVE sold by Basen
Power Product Type: Battery Cell
Battery Type: LiFePO4
Norminal Capacity: 280Ah (LF280K)
Norminal...