SniperX

The minimum charge here ends up being just short of $30 a month but that does not give you x amount of kilowatt hours to use, you're...

I live in Florida (Suwannee County) and they said as long as I wired my house like a regular house would be wired (they thought I would...

Glad to see that you got this working, sorry that I was late to the thread!

Not bricked, let’s see if EG4 can help you. Were these purchased from Signature Solar? if so, see if Jess will help. I think you need a...

It worked!!! I watched the video about the V2 battery where he says to change the ID to 64 for the V2 battery! I read somewhere there is...

Ok- I went and tried the display again, and yes, pushing enter takes me to another screen (maybe voltage, I didn't really pay attention)...

Never going to get to sleep or get this system going... I hope I can wake up to good news. lol. Thanks so much @ricardocello

Are there any specific dip switch or other settings that may need to be changed? It APPEARS in the second and third attachment above...

It comes on but I cannot get anywhere with holding the button down for 5 seconds to get into another menu...

I'm trying to get BMS Tools and BMS Test up and running for communication with my new EG4 LL V2 And I'm not sure if I have a cabling...

OMG. Do I have to worry I bricked these batteries? You have to be kidding. How do you know?

Ok I just tried all of that and note that the Baud Rate setting is different in the video from what is in the BMS Tools Manual. 19200 in...

The cable works because it updated all 6 of the batteries. Where can I find that older version? Yes, I am plugging into the RS-485...

I use “pack” IDs 1, 2, and 3 via the DIP switch on the LL-v1s. I normally use the older BMS_Tools 2.2.0 (yes they started over at...

Here’s my semi-homemade cable that works with BMS_Tools Only 7 and 8 are used on the rj45. You need to plug it into the RS-485 port...

I have this cable. My issue is it doesn't show up as ONLINE in the video Shawn (or Shaun) with SS does on youtube.

https://diysolarforum.com/threads/where-is-the-firmware-update-for-the-eg4-ll-v1-48-volt.75741/ Also here...

I know these batteries are the first version, but @EG4_Jared and @EG4_Jarrett maybe you can help. I updated the batteries per Jarrett...

Well, that's not just right. In other words, you are renting them, and then leaving me to buy your returns unknowingly, or raising...

You've gotta be kidding me. Another new guy, answering the phone. lol