S Davis
Solar Addict
- Joined
- Sep 25, 2021
- Messages
- 766
I need help with designing a back up system, the plan is for it to be mobile and have a battery module or two and an inverter/solar module.
The goal is a reliable quality system that can be broken down and moved to remote job sites by two people. The plan is to use Victron products. Primary charging will be portable panels (amount and type to be determined) and generator.
I am starting with a 42 kWh battery bank, four 24v 304ah and two 24v 280ah, I am planning on using the lynx distributors and shunt for the battery section. All DC load wiring will use DLO cable.
I looked for a diagram that was similar but couldn’t find anything. Any help would be appreciated.
The goal is a reliable quality system that can be broken down and moved to remote job sites by two people. The plan is to use Victron products. Primary charging will be portable panels (amount and type to be determined) and generator.
I am starting with a 42 kWh battery bank, four 24v 304ah and two 24v 280ah, I am planning on using the lynx distributors and shunt for the battery section. All DC load wiring will use DLO cable.
I looked for a diagram that was similar but couldn’t find anything. Any help would be appreciated.