BLUF - Inverter is pushing 0.7v higher than reported...bms request 56v and inverter will push 56.7v same for lead battery setting. (My Work around -is to program the LP4 battery Comm to request a Charge Voltage of 55.8v and the inverter will end up actually pushing 56.5v
Request - Can anybody with a 18KPV take a look at the battery information screen (while using closed loop battery communication) and see if the the voltages are accurate. My 18K is reporting.0.7V less than actual.
VBat - Voltage reported by the battery (By Comms)
VBat_Inv - Voltage reported by the Inverter (not accurate as tested at the battery connection point)
Vchgref - BMS requested max charge voltage
Ignore the I Maxchg/dischg of 50/100 (was testing out a few settings)
View attachment 155753
I wonder
@SignatureSolarJames if the "vbat_inv" can be calibrated on your end for my inverter?