Sunsynk Inverter - F55 - DC_VoltHigh_Fault

[jassdhali]

Hi,

Had this fault pop up on my app this morning - F55 - DC_VoltHigh_Fault

Looking at battery voltage it had shot up to 62.6V -



Inverter is connected to SEPLOS Mason LF280K -
BMS Over Voltage Protection is set at 56.80 - connected via CAN

The alarm has now cleared - anyone else had similar issues.
Thanks

 

[Oldphile]

I don't have a battery on this Sol-Ark, but had an F55 event today. PV voltage was high, but not 500 volts.