jassdhali
New Member
Hi,
Had this fault pop up on my app this morning - F55 - DC_VoltHigh_Fault
Looking at battery voltage it had shot up to 62.6V -
Inverter is connected to SEPLOS Mason LF280K -
BMS Over Voltage Protection is set at 56.80 - connected via CAN
The alarm has now cleared - anyone else had similar issues.
Thanks
Had this fault pop up on my app this morning - F55 - DC_VoltHigh_Fault
Looking at battery voltage it had shot up to 62.6V -
Inverter is connected to SEPLOS Mason LF280K -
BMS Over Voltage Protection is set at 56.80 - connected via CAN
The alarm has now cleared - anyone else had similar issues.
Thanks