diy solar

diy solar

4 MWh SRNE ASF48100U200-H 10kw.

I swear I had ran across somewhere where it was stated it was a SRNE. But couldn't find it later.

If you put up a request on Alibaba, you get about 25 different people trying to sell you something. :LOL:
I stand corrected, SRNE does have a 12k.
 
I stand corrected, SRNE does have a 12k.
According to the information there, it looks to be parallel capable.
 
I stand corrected, SRNE does have a 12k.
So, is it US split phase or 230v only?
1704105261997.pngxx
1704105327484.png
 
Keep me posted, even pm if you have to, if/when this inverter comes out in US split phase and parallele-able.
 
Seeing a fair amount of clipping from the 5,180w of NE solar on the ground mount. Pretty awesome they are performing so well but slightly irritating I'm losing out on photons...
 

Attachments

  • Screenshot_20240102-125203.jpg
    Screenshot_20240102-125203.jpg
    64.6 KB · Views: 11
  • Screenshot_20240102-124946.jpg
    Screenshot_20240102-124946.jpg
    93 KB · Views: 11
Well dang. And here I was planning 16 per input and you’re clipping at 14
 
Well dang. And here I was planning 16 per input and you’re clipping at 14
I suspect they won't be over achievers for very long... 8s2p would be a solid array, I think you would lose out on a few KWhs / day during optimal conditions... Could always just buy an HYP inverters to use as another MPPT and extra 5kw AC output...
 
Maybe I missed it, but are the PowMr 10kw and this inverter the same unit by SRNE? Does this unit also show ac voltage on the pv lines?
 
Maybe I missed it, but are the PowMr 10kw and this inverter the same unit by SRNE?
Yes, to the best of my knowledge.
Does this unit also show ac voltage on the pv lines?
I will need to check this again, I honestly don't remember. I would bet yes since they all seem to do this, hence the need to ground the array at the main panel....
 
Yes, to the best of my knowledge.

I will need to check this again, I honestly don't remember. I would bet yes since they all seem to do this, hence the need to ground the array at the main panel....
Your buddy from crc just messaged me. Says he has a bunch of panels on the way if you're interested
 

Attachments

  • Screenshot_20240103_211136_Messenger.jpg
    Screenshot_20240103_211136_Messenger.jpg
    79.7 KB · Views: 10
So close to two megawatt hours...
Probably will be Saturday until I see it.

I've been flipping back and forth between inverter and utility through SA a lot this past week due to shitty weather and wanting the batteries full... Only minor issues with communications, I think it's me trying to make the changes to quick (impatient), other than that I've had no issues adjusting AC charging amperage and output priority remotely.


I can't believe I didn't take a picture of the ground mount after I cleared it, the roof arrays are still partially covered, I was cursing myself for not accounting for the pitch of ground when I built the array... It was a heavy wet snow.

I'll most likely be ordering 2 HYPs unless prices continue to fall on the older model... I know it's only been 5 minutes but I still say Some Really Nice Equipment is great and I wouldn't hesitate to buy another.
IMG_20240108_181800__01.jpg
 
So close to two megawatt hours...
Probably will be Saturday until I see it.

I've been flipping back and forth between inverter and utility through SA a lot this past week due to shitty weather and wanting the batteries full... Only minor issues with communications, I think it's me trying to make the changes to quick (impatient), other than that I've had no issues adjusting AC charging amperage and output priority remotely.


I can't believe I didn't take a picture of the ground mount after I cleared it, the roof arrays are still partially covered, I was cursing myself for not accounting for the pitch of ground when I built the array... It was a heavy wet snow.

I'll most likely be ordering 2 HYPs unless prices continue to fall on the older model... I know it's only been 5 minutes but I still say Some Really Nice Equipment is great and I wouldn't hesitate to buy another.
View attachment 187683
Is there anywhere in solar assistant that shows total pv power ever produced?
 
Back
Top