I was doing a 1 month in test making sure my cables were tight. When I wiggled the battery cables it tripped the 200a battery breaker on the 6000xp. The inverter went into grid bypass mode - using my grid to power the loads.
I flipped the breaker back on and checked all connections and everything is good. Nothing loose and it didn’t do it again. But it’s been an hour and 15 minutes and it hasn’t flipped back to battery. It shows all 200 wh of battery and the battery voltage on the inverters display, so it sees the battery now. It just won’t flip back. I don’t want to cycle the inverter as it’s powering our living room and tv. Any help is appreciated. Thanks.
I flipped the breaker back on and checked all connections and everything is good. Nothing loose and it didn’t do it again. But it’s been an hour and 15 minutes and it hasn’t flipped back to battery. It shows all 200 wh of battery and the battery voltage on the inverters display, so it sees the battery now. It just won’t flip back. I don’t want to cycle the inverter as it’s powering our living room and tv. Any help is appreciated. Thanks.