I did the RS485 update and the new firmware shows on the powerpro display. Any idea why the battery is not communicating with the 18kPV anymore?
View attachment 197784
Yes, they were changed when the update happened. Switched it back and all is well. Is the RS232 update necessary? I see it only changes heater logic. I live in a climate where it doesn't get that cold.
Ok I have updated firmware on my 18K-PV to fAAB-1818 and my two PowerPro Batteries are on z02t17. Before these updates I was having a problem with my batteries only discharging to 26% even though I have it set to 6%. Now with the update it’s only discharging to 29%.
I currently have no solar panels hooked up and am only using AC charging. I am attaching my settings.
I have both my RS485 and my CAN settings to EG4/LUX....will that default to CAN, or should I change my RS485 to an incorrect setting to "force" it to use CAN?Is RS485 or CAN communication being used?
I have both my RS485 and my CAN settings to EG4/LUX....will that default to CAN, or should I change my RS485 to an incorrect setting to "force" it to use CAN?
Just a bit confused on how to properly set this up for CAN.
I don't know for sure, but I would bet 95% that the answer is "yes."anyone know?
update SS says it does NOT have the new heater logic update, so I will do it.So.... my firmware on my Powerpro is Z02T13 ..... does this have the "new" heater logic already ?
If I'm on 13 is it worth doing the entire firmware update or just do the heater logic portion?According to EG4, these are the most up-to-date versions of the Powerpro firmware.
PowerPro RS485 Firmware:Z02T17
PowerPro RS232 Firmware: S02T09
It's worth doing bothIf I'm on 13 is it worth doing the entire firmware update or just do the heater logic portion?
So I'll guess 17 vs 9?
Is it possible to update the PowerPro firmware on a Macbook? Also is there a changelog or record of what has changed with the updates so I can determine if I should put in the effort to update sooner rather than later? Im running Z02T13 which came installed from the factory and I haven't had any issues with the batteries.