MaikaiLifeDIY

Are those wheels rated for "moving" 700 pounds?

I'm not sure about the wheel's weight rating, but one thing that caught my attention is the bus in the middle with the current of three...

Daisy chain small gauge wire that isn't rated for the combined current of six batteries.

The only thing I notice off hand is the comms cable stops at the battery and doesn’t connect to an inverter or other part of the system...

Relatively small gauge wire daisy chaining positive and negative. Might be around sufficient for current of one battery, not for max...

I don't like the daisy chaining either. And that's really all that can be seen. Or commented on.

This is not a quiz or a trick question, just looking for anyone's honest feedback regarding what they think is incorrect about this...

Or, why rewrite a manual when you can just copy someone else’s?

Also, I didn't notice it at first, but these appear to be either the exact same manufacturer or technical writer, but the specs are...

I installed a pair of new batteries into the system the other day. Both sets were at 100% SOC and as of today, their midpoint is at...

Just poking around Alibaba tonight, and found a "seller" claiming to be selling these "SPH 10000TL-HU-US" for $768, plus shipping of...

That's really neat. I did mine manually and that was a PITA. I tried to set up something in Excel to automate it but ended up with the CBAs.

I saw one of your gauges has smoother colors while the others are the standard (green, yellow, red). If found this little tool and it's...

Connecting those is really easy, and as far as the look, you can make it look however you want, cards, gauges, backgrounds, colors, etc...

I know my input isn't related to SA, but the Victron Cerbo line of devices can connect directly to Home Assistant with MQTT and I...

7, if you count the SCC and load.

OCP should be located in 5 places. Marked in yellow.

I see that you have put both parallel and series jumpers in the middle. (Instead of one or the other) I'm pretty sure that there's a...

Most of that image is from Victron and their preferred configuration.

Here is what I'm ultimately going to do, unfortunately it costs another freaking $400, but it will work. They're the exact same voltage...