Bluedog225
Texas
- Joined
- Nov 18, 2019
- Messages
- 2,974
I know it’s a little over-the-top, but I want to routinely (edit-clean several) clean the contact area on busbars where the lug lands.
Getting in there with a piece of sandpaper is marginal. Getting in there with the file is too much.
Shirley there is some tool I’m not thinking of that would allow me to lightly scuff the spot before bolting it up. Any ideas?
Getting in there with a piece of sandpaper is marginal. Getting in there with the file is too much.
Shirley there is some tool I’m not thinking of that would allow me to lightly scuff the spot before bolting it up. Any ideas?
Last edited: