new jkbms firmware
- Thread starter cali-clim
- Start date
Change list
-V14.17 Upgrade logs
1.Fixed a bug where parameters were lost after BMS restart. The bug is caused by a logical error in the parameter entered by the user.
2.Change the default configuration parameters to LPF to improve security.
2.Optimized JKBMS Modbus protocol, added RCV RFV register support. The protocol must use the PC software version V2.5.0。
3.Fixed the Bug that the hardware version may be incorrect in the device information.
4.Add battery low temperature alarm to dry triggers.
-@2024-01-09 by JKBMS
-V14.17 Upgrade logs
1.Fixed a bug where parameters were lost after BMS restart. The bug is caused by a logical error in the parameter entered by the user.
2.Change the default configuration parameters to LPF to improve security.
2.Optimized JKBMS Modbus protocol, added RCV RFV register support. The protocol must use the PC software version V2.5.0。
3.Fixed the Bug that the hardware version may be incorrect in the device information.
4.Add battery low temperature alarm to dry triggers.
-@2024-01-09 by JKBMS
Finally, a changelog.
Quattrohead
Solar Wizard
Reminds me of when I was on the factory project team installing a new piece of production control software. I found a bug but the software companies project leader refused to admit it was a bug and instead called it 'An undocumented software feature'.
Alkaline
Solar Wizard
Dumb customers and their errors
In China the customer is always the one to blame ?
chaosnature
New Member
- Joined
- Sep 15, 2022
- Messages
- 448
Hi All
any one know why we are getting all unknown values even though the CAN is o.k?
any one know why we are getting all unknown values even though the CAN is o.k?
hardtop
New Member
what app is that from?
chaosnature
New Member
- Joined
- Sep 15, 2022
- Messages
- 448
This is Home Assistant ESPHome integration...
Hi-
Can you report the changelog for the new 5.17 firmware available from
www.jkbms.net
Does it fix the issue where the SOC is 100% before the pack is done charging?
Can you report the changelog for the new 5.17 firmware available from
ESS SOLUTIONS
Does it fix the issue where the SOC is 100% before the pack is done charging?
