Show Me Pics of your 18kPv or 6kXP set ups

[Markus_EG4]

I would love to see Pics of anyones set up for the 18kPV or the 6kXP. All the different setups and configurations.

I’ll Start this is my setup

 

[jmjack]

Here is my 6000XP setup. I may add a wire trough below the inverters in the future to tidy things up, but this works well for now.

 

[Will Prowse]

Current setup. Grid input of my 6000XP setup is being fed by the output of my EG4 18KPV:



And my 18KPV:


Total battery capacity is 78kWh. Runs everything. Excess power is backfed at peak rate times.

 

[Zakharov]

 

[i8iridium]

Mine is a bit unconventional. I’m using a EV battery (~380vDC) to feed a 6kXP via the PV inputs. The AC then feeds two SMPS that converts AC to 110vDC and charges two Ecoflow Delta Pro via their Solar input. The Ecoflows run the house via an interlock breaker on my main panel. This gives me the option to use the car or a gas inverter generator. Overall, It’s really a giant conversion device with a lot of inefficiencies, but it’s a big experiment right now.

 

[FlyinBrian]

I would love to see Pics of anyones set up for the 18kPV or the 6kXP. All the different setups and configurations.

I’ll Start this is my setup

Here is my 6000xp setup. It replaced 2 growatts. Working great! Going to probably get another to put in parallel.

 

[riecraig]

As good as any thread to have my first post on!
Started this project of converting my GF’s 3 stall Hart trailer w/ living quarters to fun toy hauler that we can travel in. In progress and will add more photos as I go!

 

[neo2299]

Yes, I know the wiring isnt perfectly cleaned up yet - 400amp service, both 200amp electrical panels have one inverter with 200amp pass through.

 

[Randya]

My first system, "under construction".
Waiting on another Power Pro battery.
Also have 6 of my 20 Canadian Solar 400w panels mounted so far.

 

[EJansen]

Not using the 6500s anymore, but I figure if the 18Kpv has some sort of issue, those can be a backup.

 

[TK1979]

Yes, I know the wiring isnt perfectly cleaned up yet - 400amp service, both 200amp electrical panels have one inverter with 200amp pass through.


View attachment 185087

Woah ? that's a lot of juice!

 

[TK1979]

View attachment 185103

Not using the 6500s anymore, but I figure if the 18Kpv has some sort of issue, those can be a backup.

Clean set up!

 

[EJansen]

Clean set up!

Thank you sir!, I tried. Still needs work, since technically the DC conductors should be in conduit, but I'll fix that in a later phase.

 

[Markus_EG4]

Hey guys EG4 is looking for some nice install pics of set ups to add the the EG4 website. If you have some please feel free to post here with the consent of EG4 using them for the website.

Thank you

 

[G00SE]

Hey guys EG4 is looking for some nice install pics of set ups to add the the EG4 website. If you have some please feel free to post here with the consent of EG4 using them for the website.

Thank you

I have some nice camera gear, just not the eg4 equipment.
Send me equipment and I’ll take install pics!

 

[rodneyhunt]

 

[thepetersms]

My battery shed which feeds my 30x50 shop and 1 bed 1 bath man cave

 

[Meilyn22]

Commenting to bring this thread up! Please keep posting. Really enjoying the thread.

 

[RyGuy]

I would love to see Pics of anyones set up for the 18kPV or the 6kXP. All the different setups and configurations.

I’ll Start this is my setup

This is just the thread I need for ideas as my 18kpvand 2x batteries just arrived. Thanks to all!