Boomerweps
New Member
Currently have an EPEVer Tracer 100/30 MPPT hooked up. 4 100watt CIGS panels, 2S, 2P configuration for about 60 volt 10A supplied.
Bought & installed the MT50 remote display.
EBaying a used Victron 75/15, at a killer price, of course. Should have bit the bullet and gotten a Victron smart Solar 100/30 to start with ;(
Anyways, would you leave the Tracer as is and use the Victron elsewhere? Or replace the Tracer with that Victron? Either/or, no other options, please.
Assumes the Victron is working at 100%. Note, I would prefer the Bluetooth over the remote display. I read of issues with the Bluetooth use using the EpEver dongle, plus I already blew the $$ on the MT30.
Bought & installed the MT50 remote display.
EBaying a used Victron 75/15, at a killer price, of course. Should have bit the bullet and gotten a Victron smart Solar 100/30 to start with ;(
Anyways, would you leave the Tracer as is and use the Victron elsewhere? Or replace the Tracer with that Victron? Either/or, no other options, please.
Assumes the Victron is working at 100%. Note, I would prefer the Bluetooth over the remote display. I read of issues with the Bluetooth use using the EpEver dongle, plus I already blew the $$ on the MT30.