My setup currently is Panels to Epever Tracer 80A to 12v LA Battery Bank to 12v Inverter w/ Predator 3500 as backup generator. My bank and panels are not where I need them to be size wise so every night I'm having to start the generator when I get close to 12.3-4 and then all is good until I...
I thought I bought the right items but now I'm lost on how to wire properly. I have 32 New Eve 304ah LifePo4 Cells and 2 Daly 16s 300a 48v Smart BMS w/ Bluetooth. I was thinking that I need 2 16s BMS's for creating 2 banks of 16 for my 48v build. Now I'm lost on how to wire and setup. Any help...
Woke up this morning to see my controller only putting out 12-13v 0 amps. Been testing everything and even tried different cables and panels. While I'm getting proper volt/amp readings from panels, and getting the same readings to the end of the wires that go into the controller, the controller...
Just picked up 2 SK48V100NC batteries from SOK and upon mounting and precharging, the voltage is 40v out of the box. Isn't this a little low for new lifepo4 batteries?
So my 16 LifePO4 cells are stacked on there side in 2 vertical columns because of space requirements. My question is, since the coldest cell in my bank is closest to the floor, can I connect the victron SmartShunt Temp Sensor to the lowest positive cell terminal in the stack (cell 8 so that I...
Anyone have any experience with the 310ah LifePo4 cells from ali?
US $967.75 21%OFF | 8PCS A Grade 3.2V LiFePO4 310AH LITHIUM IRON PHOSPHATE BATTERY ELECTRIC BUS RV ELECTRIC VEHICLE 24V 310AH POWER LITHIUM BATTERY
https://a.aliexpress.com/_mrKF29D
I'm ready to make my first purchase to get...
I'm trying to understand why configuring a system to take advantage of the optimal output and availability of equipment and power isn't talked about very much. I do understand that finances are a challenge in some cases along with the need for split phase but there is a happy medium that has a...
I've finally been able to pull the cells out I bought last year out of storage and build my battery banks. My concern is that there is a difference between cells. None have been hooked up and the only exposure they have had has been seasonal temp changes. Each cell is 305ah and all showing...
I'm looking to do an off-grid installation that requires a split phase setup and have been looking at the eg4 8K all-in-one charge controller. In Wills videos I believe he said that it seems to work fine in off grid mode but it's the on-grid features that are an issue. I'm wondering if anyone...
I have found a supplier on Alibaba that seems legit but want to make sure my order is properly protected by trade assurance. I have had them add notes to the order specifying absolutely everything that is included in the order along with quantity and detail. I am also having them commit to a...
I ran the numbers to calculate the max output from the 2 panels i have and would like to pair with a SmartSolar 100/20 (48v config). I chased down the coldest day recorded in history for my area (hit these temps twice a long long time ago) and it put me at the the max output of...
I've seen examples of how to appropriately wire 4 to charge and discharge evenly but for some reason 10 batteries breaks my head lol. Can someone please assist.
I'm setting up a lv6548 and noticed in the docs (attached) that it's recommended detailed example provided would exceed the max voltage rating in a 6S configuration when temps dip below 50°F. Am I wrong or misunderstanding something here? Taking temperature coefficient into consideration I...
Have a modular build I am doing for a client. In my past projects I've built my lifepo4 batteries but it appears that there are some options out there that really compete with the cost of the DIY build. I am looking for suggestions/recommendations for pre built battery banks that play well with...
I'm needing to order the primary inverter for my offgrid home. Below is how everything is setup currently. Can I please get recommendations for some reliable efficient ones from the community. I know we are looking for at least 5kw and trying to decide on either putting small tankless water...
I was looking back at my purchase of cells and bms and not sure if it was a good deal or not. Can I get others opinions?
Total Cost: $4,666.00
32 Eve Grade A 304ah Lifepo4 Cells
32 bus bars
64 studs & nuts
2 Daly 48v 16s 300a Smart BMS w/Bluetooth
How does one handle properly wiring large gauge PV wire to an CC that has smaller connections?
Scenario :
6x Panels @ 37.07v/13.79a
Distance from Panels to CC: 100ft
EG4 6000EX : PV Connection unspecified (assuming <= 8AWG)
* Not provided in the manual
At this distance, running 15a at 100'...
Is there a safe maximum % of voltage drop between PV and CC using the wire without long term degridation?
This is what I am wanting to do. I am wanting to connect the following together:
1 - Victron SmartSolar 150/35
12 - 4S3P PV's each rated max 41V/11A
This would give max output of 164V/33A...
Has anyone encountered this issue and how did they resolve it? I recently purchased a lv6548 second hand. When I go to register an account for wifi connectivity it tells me I cannot because the device is already registered.
I'm really wanting my 48v pack to be all together and space is forcing me into 2 columns of 8. I will be laying them on there side, with 2 columns of 8. Compression will be maintained only by threaded rod at the top, middle, and bottom, on the outside of the columns (not in between) using 2 -...
So I'm reevaluating going 48v because I believe I had seen it somewhere that it is possible to build a large stable balanced charge/draw 12v battery bank (for example 24 12v deep cycle 100ah batteries in parallel) if it's designed right. 48v sounds great but though I have funds to build the...
It's been a out 4 months now since my 3000w wzrelb inverter blew up and think I finally have enough in the budget to replace it. I did use the 3000w so 5000 would be a better fit if possible. Any recommendations would be great. I even noticed a refurbished growatt 6000 that was about $900. The...
So after the past year of learning from all of you I placed my orders and I think I have everything in and ready to assemble. I cannot afford to screw this up so I'm hoping I can get checks and balances along the way to make sure I have everything done properly. If I'm missing anything please...
My current solar inventory is as follows:
12 - 325w Trina Panels (40.40V@10.30A/76"x40")
32 - 3.2v New Eve Grade A 304ah Cells (in route)
2 - New Daly 48v16s 300a BMS w/ Bluetooth (in route)
4 - Victron SmartSolar 100/20 48v Charge Controllers
Now my predicament,
I have a new cabin being...
Was thinking about adding a large buck converter to add redundancy in the case where the 48v inverter fails and my only option is local 12v resources. I came across this beast of a converter and was curious what other's thought about it.
Tian Power DCDC 175A 2500W 48V to 12V Buck Converter and...
Beginning to assemble my battery setup and know I need to top balance the cells for optimal life. What I have at the moment is:
4 Victron SmartSolar 100v/20a/48v CC
1 Victron SmartShunt 500a
2 Daly 48v/16s/300a Smart BMS w/Bluetooth
32 New/GradeA Eve 3.2v/304ah LifePo4 Cells
12 Trina 325w...
So I need to make a temporary 30' run from a charge controller to a PV array and I already have a 40' red nylon coated THHN stranded and 40' black nylon coated THHN stranded that I can use. The PV array is configured in series parallel to push a max of 90v@19a to a 100/20 mppt. It's my...
I searched for a deep dive into the pros and cons of each in an offgrid setting but found very little. Hopefully this will fill the gap. Here are some of the questions I have.
* Is the output of microinverters pure sine wave?
* Can microinverters produce 120/240 (split phase) without additional...